BMW 4 Coupe Series Manual page 72

Hide thumbs Also See for 4 Coupe Series:
Table of Contents

Advertisement

CONTROLS
Renaming a driver profile
Non-ConnectedDrive countries:
1.
"CAR"
2.
"Driver profiles"
As an alternative for Steps 1 and 2, the profile
image can be tapped in the top status bar.
3.
Select driver profile.
4.
"Settings"
5.
Enter a profile name.
6.
Select the icon.
ConnectedDrive countries:
The name of the driver profile is transferred from
the ConnectedDrive account. Changes for the
profile name must be made in the Connected‐
Drive account.
Selecting a profile picture
1.
"CAR"
2.
"Driver profiles"
3.
Tilt the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4.
"Avatar"
5.
Select the desired profile picture.
ConnectedDrive countries:
The profile image is transferred from the Con‐
nectedDrive customer portal or the BMW app.
Deleting the driver profile
1.
"CAR"
2.
"Driver profiles"
3.
Tilt the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top status bar.
4.
"Settings"
5.
"Remove driver profile"
6.
Select the desired driver profile.
7.
"Delete now"
72
Personal settings
Online Edition for Part no. 01405A392C9 - VI/21
ConnectedDrive countries: If the driver profile
was synchronized with a ConnectedDrive ac‐
count, the stored data in the ConnectedDrive ac‐
count will be retained.
System limits
A clear detection of the desired vehicle key may
not be possible in the following cases, e.g.:
The driver unlocks the vehicle via Comfort
Access.
The driver changes, but the vehicle is not
locked and unlocked.
When multiple vehicle keys are located in the
outer area on the driver's side of the vehicle.
ConnectedDrive countries:
A driver profile can only be created and
synchronized with the ConnectedDrive account
when the vehicle has cellular network reception.
The use of personal settings that are stored in
the ConnectedDrive account in other vehicles is
subject to technical limitations. For example, set‐
tings may be stored for a system that is not avail‐
able, or available in a non-compatible version, in
other vehicles.

Advertisement

Table of Contents
loading

Table of Contents