BMW 4 Coupe Series Manual page 145

Start with launch control
1. Turn on drive readiness.
2. Press the button.
TRACTION is displayed in the instrument
cluster and the indicator light for DSC OFF
lights up.
3. Engage selector lever position S.
4. With the left foot, forcefully press down on
the brake.
5. Press and hold down the accelerator pedal
beyond the resistance point at the full throttle
position, kickdown.
A destination flag is displayed in the instru‐
ment cluster.
6. The starting engine speed adjusts. Wait
briefly until the engine speed is constant.
Keep the accelerator pedal in this position.
7. Release the brake within 3 seconds after the
destination flag illuminates.
The vehicle accelerates.
Upshifting occurs automatically as long as the
destination flag is displayed and the accelera‐
tor pedal is not released.
Repeated use during a trip
After Launch Control has been used, the trans‐
mission must cool down for approx. 5 minutes
before Launch Control can be used again.
Launch Control adjusts to the surrounding con‐
ditions, when used again.
After using Launch Control
To increase driving stability, activate DSC Dy‐
namic Stability Control again as soon as possible.
System limits
An experienced driver may be able to achieve
better acceleration values in DSC OFF mode.
Online Edition for Part no. 01405A392C9 - VI/21
Driving
CONTROLS
145