BMW 4 Coupe Series Manual page 254

Hide thumbs Also See for 4 Coupe Series:
Table of Contents

Advertisement

CONTROLS
Automatic camera perspective
The automatic camera perspective shows a
steering-dependent view in the respective driv‐
ing direction.
This perspective adapts to the respective driving
situation.
As soon as obstacles are detected, the view
changes to a fixed display of the area in front or
at the rear behind the bumper or, if necessary,
changes to a side view.
When reverse gear is engaged, the automatic
camera perspective is, if necessary, exited and
the system uses a fixed perspective of the rear‐
view camera. If necessary, manually select the
automatic camera perspective when reverse
gear is engaged. The automatic camera per‐
spective will be retained for the current parking
operation.
Movable unobstructed camera
perspective
With selection of the movable camera perspec‐
tive, a circle appears on the Control Display.
By turning the Controller or via touch function,
specified perspectives on the circle can be se‐
lected.
The current perspective is marked with a camera
symbol.
To leave the function, move the Controller side‐
ways and select another camera function.
Toolbar on the right
Assistance functions can be activated and set‐
tings can be entered via the right toolbar via
iDrive. Move the Controller to the right, if needed.
"Autom. Parking".
"Back-up Assistant".
"Camera image":
"Brightness".
"Contrast".
254
Driver assistance systems
Online Edition for Part no. 01405A392C9 - VI/21
"Parking aid lines".
"Obstacle mark.".
"Settings": apply settings, for instance to
use the activation points for Panorama View.
Rearview camera
This view shows the picture of the rearview cam‐
era.
Selection window
The individual camera perspectives can be se‐
lected in the selection window via iDrive.
Parking aid lines
Lanes
Lanes help you to estimate the space required
when parking and maneuvering on level roads.
Lanes depend on the steering angle and are
continuously adjusted to the steering wheel
movements.
Turning circle lines
Turning circle lines can only be superimposed on
the camera image together with lanes.

Advertisement

Table of Contents
loading

Table of Contents