Location And Function Of Parts And Controls - Sony Hyper HAD BVP-750 Operation Manual

6
Location and Function of Parts and Controls
@ FILTER LOCAL (filter local control) button
Press the CC or ND filter button while pressing
this button to enable switching of the CC and ND
filters.
OND filter button
Selects the desired ND filter while pressing the
FILTER LOCAL button.
| Filter No. Filter
| 1 _|_ Clear
| 2 1/4 ND
| 3 /e ND
4 1/46 ND
F 5 Yea ND
© CC (color temperature conversion) filter
button
Selects the desired CC filter suitable for the
lighting conditions while pressing the FILTER
LOCAL button.
D 6300K
E | 8000K
OQ WHITE (white balance memory select)
switch
Selects the white balance adjustment method and
memory to store the adjusted value.
PRESET: White balance is automatically
adjusted to the preset value for the color
temperature of 3200K.
Aor B: Memory A or B is selected.
© OUTPUT/AUTO KNEE (output signal
select/auto knee) switch
Selects an output signal supplied to a VTR,
viewfinder and video monitor (color bar signals or
camera picture). When a camera picture is
selected, the auto knee function can be activated.
BARS/OFF: Color-bar signals are output, and the
auto-knee circuit does not function.
CAM/OFF: A camera picture is output, but the
auto-knee circuit does not function.
CAM/ON: A camera picture is output, and the
auto-knee circuit functions.
O GAIN switch
Selects the appropriate video gain according to the
illumination of the subject to be shot. The values
for positions L, M, and H are set with the setup
menu.
For details, refer to the System Manual.
@ CAM/VTR (camera/VTR) switch
Selects the control signal for the VTR when the
VTR is connected to this unit using the optional
CA-753/753P Camera Adaptor. According to the
setting of this switch, the VTR starts recording as
follows:
OFF/SAVE: Power-save position. Recording
does not start upon pressing the VTR START
button. No picture appears on the viewfinder
screen,
ON/SAVE: Power-save position for recording.
Recording starts a few second after the VTR
START button is pressed. A newly recorded
picture may not smoothly be connected to the
previously recorded part.
ON/STBY: Recording starts immediately upon
pressing the VTR START button.
The WHITE, OUTPUT/AUTO KNEE, GAIN, and
CAM/VTR switches do not function when the
camera is connected to the CCU-700/700P.
@ DISP (display) switch
Used for displaying the camera status such as
switch settings, items and results of automatic
adjustments on the viewfinder screen.
PAGE: A screen for setting the displaying items
and functions appears.
ON: Display function activated
OFF: Display function not activated
© SEL (item select) switch
Functions when the DISP switch is set to PAGE.
Each time the switch is pushed up or down, the
arrow indicating the current selection on the screen
moves one line up or down.
@ UP/DOWN switch
Sets the item selected with the SEL switch by
pushing this switch to UP or DOWN according to
the instructions on the screen.