Table of Contents
Advertisement
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging and the transit
bolts before installing the appliance.
WARNING!
Use the gloves.
1. Remove the external film. If necessary,
use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door and remove the
polystyrene piece from the door seal and
all the items from the drum.
5. Carefully put the appliance down on its
rear side.
6. Put the front polystyrene packaging
element on the floor under the appliance.
Make sure not to damage the hoses.
7. Remove the polystyrene protection from
the bottom.
ENGLISH
11
Advertisement
Table of Contents
