Canon imageRUNNER ADVANCE C7500 II Series Customer Expectation Document page 54

Booklet Finisher-X1 Table Continued
Item
Capacity Per Tray
18 If the customer is using Thin Paper or Custom Size Paper (less than 15 lb bond (59 g/m
approximately 750 sheets (or 3 7/8" (97 mm) in height).
19 1 Point Front (Diagonal), 1 Point Back (Diagonal), Two Points Center (Parallel).
20 The optional Paper Folding Unit-J1 must be attached.
IMPORTANT
The Booklet Finisher-X1 can staple any other paper type except, Transparencies,
Tracing Paper, and Labels.
Version 8 imageRUNNER ADVANCE C7500 and C7500 II Series Customer Expectations Document
imageRUNNER ADVANCE C7500 and C7500 II Series Customer Expectations Document
Tray
No Collating, Collate,
and Group Mode
No Collating, Collate,
and Group with
Different Paper Sizes
Offset Mode
A
Staple Mode
Z-Fold Mode
Half Fold Mode
No Collating, Collate,
and Group Mode
B
No Collating, Collate,
and Group with
Different Paper Sizes
Z-Fold Mode
Half Fold Mode
Specifications
Mode
LTR, EXEC, and STMTR:
1,500 sheets (or 7 3/4" (195 mm) in height)
13" x 19", 12 5/8" x 17 11/16", 12" x 18",
11" x 17", LGL, LTRR:
750 sheets (or 3 7/8" (97 mm) in height)
750 sheets (or 3 7/8" (97 mm) in height)
LTR and EXEC:
1,500 sheets (or 7 3/4" (195 mm) in height)
11" x 17", LGL, and LTRR:
750 sheets (or 3 7/8" (97 mm) in height)
LTR and EXEC:
1,500 sheets/100 sets (or 7 3/4" (195 mm) in
18
height)
19
11" x 17", LGL, and LTRR:
750 sheets/50 sets (or 3 7/8" (97 mm) in
height)
11" x 17":
30 sheets (or 7 3/4" (195 mm) in height)
20
LGL and LTRR:
10 sheets
20
LTRR: 10 sheets
LTR, EXEC, and STMTR:
250 sheets (or 1 1/4" (32 mm) in height
11" x 17", LGL, LTRR:
125 sheets (or 5/8" (16 mm) in height)
Paper with a length longer than 17" (432 mm):
30 sheets
LGL, LTR, LTRR, EXEC, STMTR:
125 sheets (or 5/8" (16 mm) in height)
Paper with a length longer than 17" (432 mm):
30 sheets
20
11" x 17", LGL, LTRR:
20
LTRR: 10 sheets
Paper Size
18
18
10 sheets
2
)), the tray can hold
Page 54