Technics SC-DV250 Operating Instructions Manual page 20

Recording operations |
Ls}
B ROQTS948
i=)
Refer to illustration E¥ on page 27 of the illustrated booklet.
Preparation: Do the preparatory steps (= page 19)
1° Tune to the required station.
(= page 14, 15)
2 Press [@ REC PAUSE].
To stop recording
Press [Ml].
To temporarily stop recording
Press [(@ REC PAUSE].
The deck goes into recording standby mode.
To resume recording press [<I] or [>] with the flashing indicator.
Refer to iNustration [J on page 27 of the illustrated booklet.
Preparation:
®Do preparatory steps 1 and 3 (= page 19).
insert the tape to be recorded in deck 1.
1° Set the tape direction on both decks.
@ Press [DECK 1/2] to select "DECK 2".
@® First press [<]] or [>], and then [fi].
Repeat steps (1) and @) tor deck 1.
2 Press [TAPE EDIT] to start recording.
The indicator "<1" or "C>" shows deck 2 direction.
If either deck 1 or deck 2 stops, the other deck also stops.
To stop recording
Press [i].
Both decks stop.
To enjoy another source while recording
Start playing the other source.
You can change the volume level and tone quality without affecting the
recording.
Refer to illustration [4] on page 27 of the illustrated booklet.
This timer starts play of the selected source at the selected time.
The displays in the illustrations show settings for preset radio channel 1 to
play between 6:30 and 7:40 at —48 dB.
Preparation: Turn the unit on, set the time (+ page 7), preset radio sta-
tions if you want the timer to start playing the radio
(™ page 15).
1 @ Press [CLOCK/TIMER] to display "©PLAY" on
the tuner/amplifier.
Each time you press the button:
CLOCK »@PLAY-»@REC— Original display
—— Sih
@ Press [SET] within 3 seconds.
2 Follow these steps to set items @ to @.
@ Press [TUNING (v or «)] to select the condi-
tion required and
@ Press [SET].
@) Start time
® Finish time
© Source
TUNER <—»DVD<—>TAPE
tc ah
Insert a disc or tape if you select these sources.
If you select TUNER
Select a preset channel.
@ Volume
The play timer is now on standby. The display shows each condition
again then restores the original display.
3 Press [¢)/l] to turn the unit off.
®@PLAY/@REC indicator remains illuminated to show the play (or
record) timer is on.
To cancel the timer
Press [OPLAY/OREC] so "@PLAY" goes out,
Each time you press the button:
©PLAY—@REC—©PLAY ©REC—Light off
4 dais , < 4 es |
The play timer will be canceled, but the settings stay in the
memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.