Technics SC-DV250 Operating Instructions Manual page 18

Changing sound field and quality Bm
3
RQTS948
i)
Speaker level adjustments
Refer to illustration EJ on page 25 of the illustrated booklet.
Remote control only
DOLBY DIGITAL, DOLBY PRO LOGIC
If the level of the speakers appears to be different while listening to a
source, adjust the levels of the speakers to the same apparent level.
enjoying the source.
@ Press [SHIFT]+[TEST] to output a test signal.
A test signal is output from each speaker in order.
To stop the test signal, press [SHIFT]+[TEST] again.
Leh: Front left speaker
Cch: Center speaker
Reh Front right speaker
RSch: Right surround speaker
LSch: — Left surround speaker
(No signal is output for the subwoofer.)
@® White the speaker to be adjusted is outputting a signal
Press [A] (to increase the level) or [¥] (to decrease the level).
The level of the speaker changes.
Repeat step @) as desired.
To adjust the levels during play
@ Press (CH SELECT] to select the speaker.
Each time you press the button:
In Dolby, Digital
Leh- »Cch->Reh->RSch->LSch—SWeh
AS o g ' il
SWeh: Subwoofer (Adjust only when connected)
In Dolby Pro Logic
Lch—Cch-: »RchSch
"= |
@ Press [AJ or [¥] to adjust the level.
SUPER SURROUND
While playing a source
1. Press [CH SELECT].
2. Press [A] (to increase level) or [¥] (to decrease level).
Refer to illustrations EJ-I on page 25 of the illustrated booklet.
B SEAT POSITION
1 Press [SEAT POSITION].
The indicator flashes green
2 While the indicator is flashing (within 10 seconds)
Adjust the seat position with [<4, >, A, ¥].
The indicator flashes for 10 seconds then lights green.
To cancel
1. Press [SEAT POSITION] so the indicator flashes.
Press [CENTER FOCUS].
The indicator turns green.
DIALOGUE ENHANCER is canceled when you turn this on (# page 10).
To cancel
Press [CENTER FOCUS] so the indicator turns orange.
D.. VIRTUAL REAR SURROUND
Press [VIRTUAL REAR SURROUND].
The indicator turns green.
To cancel
Press [VIRTUAL REAR SURROUND] so the indicator turns orange.
E MULTI REAR SURROUND
Press [MULTI REAR SURROUND].
Tha indicator turns green.
To cancel
Press [MULTI REAR SURROUND] so the indicator turns orange.
On the remote control
@ Press [SHIFT}]+[AV EFFECT].
® Press [+4] or [>] so the surround effect indicators flash in
order.
® Press [A] (ON).
@ (lf you select SEAT POSITION)
Adjust the seat position with {<4, >, A, ¥].
orange.
The seat position is remembered by the unit and is reactivated
when you turn seat position on again.