Table of Contents
Advertisement
yoeg
Asayeg
ay]
BujBueyo
E uomneunoju|
je9uety)
Changing the Battery Pack
Even though operated and charged correctly, the battery life will terminate.
When this occurs, purchase a new Ni-Cd battery pack, KX-RC30 (optional),
and replace the old battery pack.
1. Turn off CPA and unplug the AC adaptor.
2.
Open the bottom cover and remove the battery pack screw.
4. Replace and tighten the screw.
After exchanging the battery pack be sure to plug in the AC adaptor and
recharge the battery for about three (3) hours as the remaining battery
amount will be incorrectly displayed.
CAUTION:
To reduce the risk of fire or injury, read and follow these
instructions carefully.
eNever disassemble or modify the battery pack. It is made of strong
alkali and may irritate skin or damage clothes.
e Never short-circuit the battery pack. Overheating the battery pack may
cause burns.
* Never dispose of the battery pack in a fire. It may explode.
eNever try to recharge the battery without the pack unit. Always
recharge the entire battery pack CPA.
Advertisement
Table of Contents
