Table of Contents
Advertisement
Setting Print Positions on Your Check
When a position on your check corresponds to neither "A" nor "B".
(1) Place the template on the top of your check.
(2) Fit the bottom-left corner of your check in the bottom-left corner of the
template, then insert the remaining corners. Align the bottom and left side
of your check with bottom and left lines on the template.
(3) Check to see where the bottom-left point of each of five (5) data items
correspond to on the template ruler.
Example: Setting print position for "DATE" according to the template ruler
(X=60, Y=39).
Operation
Display/Description
(D Select position of "DATE" (Select R).
DATE : ABI) PAY
:A
5:B
SETUP
Ce (>
(ENTER
DOL.: A MEMO:A
(Select PRINTER)
>>)
(2) Enter "X" and "Y" points.
ENTER X , Y
ENTER)-(6X(0X3X9)
DATE
X-60
Y-39[]
eBy entering numbers not within
the range setting (X; 14 to 99,
Y; 11 to 42) of each of the five
(5) items, the print positions
will be automatically set on the
Maximum or Minimum value of
the X, Y coordinates.
elf you want to print a demo,
see p. 21.
ES
How to correct a mistake
eClear the incorrect letters/numbers under the cursor by pressing
(«)/()/(«)/(v) and (DELETE).
ES
elf "PRINTING AREA OVER CONTINUE NA?" is displayed when you
attempt to print a demo, it means that you have entered a number that
will cause data to be truncated when printed. Press "Y" to print the
demo or press "N" and re-enter the data.
2842
INOA
uo SUONISOd
uud
bumas
eo uonound
423H2
22
Advertisement
Table of Contents
