Table of Contents
Advertisement
Troubleshooting Guide
The display shows
The life of the lithium | Go lo a service center to
"CHANGE LITHIUM
battery is terminated. | have the battery pack
BATTERY" and CPA
exchanged.
will not accepl any
(See the included list of
key function.
authorized service centers.)
CPA does not print
correctly or printing
is blurred.
Install ribban cassette
correctly. (See p. 54)
The ribbon cassette
is not installed or is
installed incorrectly.
The ribbon cassette
is run oul.
Replace with new ribbon
cassette.
(See P. 54)
The printing
posilions are not
correct.
The printing
positions are sel
incorrectly.
Sel the printing posilions
correctly. (See p. 20)
A check is nol fed.
A check is not sel
on the printer
correctly.
Noise on the AC line
or static electricity
may prevent CPA
from operating
properly.
Set a check on the printer
correctly.
(See p. 19)
The display shows
"MEMORY ERROR".
CPA does not
operate properly, ar
memory may contain
garbled characters.
Turn the power switch off
for a few seconds then
turn the power switch on
again. If the CPA.does not
function properly, reset
CPA (p. 53), and then
print the records on the
paper roll. If the CPA still
does not function properly,
perform a tolal reset
following the procedure on
p. 14.
Troubleshooting
51
aping
bunoo
E uong
|eJa
Advertisement
Table of Contents
