Antenna Connections - Kenwood KR-V126R Instruction Manual

ANTENNA connections
AM outdoor
antenna FM indoor
antenna
AM loop antenna
CATV cable
Connect as shown in the figure. When connecting a CATV
receiving unit, be careful of the following items.
@ If the signal at CATV IN terminal is weak, pulsating noise
or blinking picture may result on the television connect-
ed to the CATV OUT terminal. If this happens, connect
a CATV booster amplifier to the CATV IN terminal to
strengthen the signal.
@ Before connecting this unit to the CATV system, consult
the cable company.
@ When a CATV broadcast which is currently being
received with this unit is different from that received
with the TV receiver, the picture or sound may be
distorted.
AM antennas
AM loop antenna
Install the AM loop antenna to the supplied loop antenna
stand and place them on a shelf, etc., or install them in the
rack or wall with screws.
Rotate the AM loop antenna to the right or left for best
reception.
Note: ———-—_---______-—_____——--
Do notplace the AM loop antenna on the unit. As this unit employs
computing device, placing the AM loop antenna on the unit may
result in noise generation. Place the AM loop antenna away from
the unit.
3002
Feeder
FM outdoor
antenna
750
Coaxial
Cable
To TV Antenna termianl
CATV cable
Vary the direction of
the loop antenna.
AM l!foop antenna
Keep the speaker leads
and AC cord away from
the AM loop antenna.
AM loop antenna holder
KR-V126R/KR-V106R/KR-V86I€K) 7