Kenwood KR-V126R Instruction Manual page 11

(KR-V126R)
a) a IE
PRESET AUTO 1-10
SCAN MENORY SAR 148-20 CLEAR
Sy A, a a
TUNING
AUTOS
<_sown ve >> WANUAL__DIRECT
LE 1S A
ae DIGIT CHARACTER
SELEC
iu ira =
—
et
rar
Ca LRTI cantace
M/C
—S==a.
REMOTE SENSOR
@ SURROUND MODE switch (KR-V126R)
Select the desired surround mode with this switch when
the SURROUND ON/OFF switch is set to ON. Each time
this switch is pressed, DOLBY, THEATER or STADIUM
surround mode is selected in turn cyclical.
This becomes the recall function when the surround
function is not displayed. When this key is pressed with the
surround function displayed, the mode is changed.
@ SURROUND ON/OFF switch
(KR-V126R/KR-V106R)
Press this switch to activate or deactivate the surround
output.
In the KR-V106R, STADIUM mode is automatically én-
tered when this key is pressed.
@® REAR VOLUME controls (KR-V126R/KR-V106R)
Adjusts front/rear balancing when surround speakers are
used. The control range is +20 dB of the front speaker
level,
@ THROUGH DUBBING [2] > [1] key
This activate the through dubbing from VIDEO 2 to VIDEO
Vs
@ THROUGH DUBBING [3]> [1] key
This activate the through dubbing from VIDEO 3 to VIDEO
1.
Note:
Pressing the THROUGH DUBBING key twice will resume the
previous mode.
@® Input selector switches
VIDEO 1 — Selects the video recorders connected to the
VIDEO 1 jacks.
VIDEO 2 -— Select the video recorders connected to the
VIDEO 2 jacks.
VIDEO 3 - Select the video recorders connected to the
VIDEO 3 jacks.
TAPE 1 — Press this switch to play back a tape deck
connected to TAPE 1 jacks.
TAPE 2 - Press this switch to play back a tape deck
connected to the TAPE 2 jacks. (The TAPE-2 switch is
Operated in priority to any other audio input systems.)
TUNER - Selects the tuner mode.
CD/AUX - Selects the source connected to the CD/AUX
jacks.
PHONO - Selects the program source played on the
turntable.
@® AUDIO INJECTION switch
Press this switch ON when replacing the sound of VIDEO
1, 2 with that of AUDIO source, or when the sound
equalized by graphic equalizer is required on dubbing
between VIDEO sources.
@ CATV ON/OFF switch
Press this switch to select FM 759 or CATV 752 antenna
line.
@ CARTRIDGE selector switch (KR-V126R)
This switch is used to select the type of cartridge of the
turntable connected.
MM - When using an MM (moving magnet) and an high
output MC (moving coil) cartridge, set the switch to this
position. ;
MC - When using an MC cartridge set the switch to this
position.
@ REMOTE POWER STAND BY indicator
This indicator lights so far as the power cord is plugged
into the AC outlet. It is tit to show that the POWER switch
on the front panel or the POWER key on the remote control
unit can be activated.
@& REMOTE SENSOR
Point the supplied remote contro! unit towards this sensor
and operate. It blinks when the signal from the remote
control unit is received.
@ MUTING key
When the muting key is pressed, the MUTING indica tor in
the display window will flash, and the overall list ening
sound level is reduced.
When the key is pressed again, you can restore exactly the
same listening level as before.
KR-V126R/KR-V106R/KR-V8ER (xy 11