Starting A Flooded Engine - Shindaiwa 488 Owner's Manual

STARTING A FLOODED ENGINE
1.
2.
3.
Access to 488 spark plug requires
removing air filter cover.
Remove the air filter cover, discon-
nect the spark plug lead, and use the
spark plug wrench to remove the
spark plug in a counter-clockwise
direction.
Remove spark plug
NOTE: SS
See
If the spark plug is fouled or soaked
with fuel, clean or replace as
required. For correct spark plug
size and gapping procedure,
(see page 24).
Clear excess fuel from the
combustion chamber by cranking
the engine several times while the
spark plug is removed.
Replace the spark plug, and then
reconnect the spark plug lead.
Repeat the starting procedures for
"warm engine."
. If the engine still fails to fire or start,
refer to the thoubleshooting
chart at the end of this manual.
15