Table of Contents
Advertisement
Name Settings
Click on "NAME" on the left-hand column below HOME.
MONITOR NAME
Allows you to customize the monitor's name, up to a maximum of 16 characters long. This name
is shown when searching for devices on the network when using an application such as NaViSet
Administrator. Giving the monitor a unique name allows it to be easily identified when viewing a list of
monitors on the network. The default name is the monitor's model name.
HOST NAME
Type in the hostname of the network to the monitor.
Up to 15 alphanumeric characters can be used.
DOMAIN NAME
Type in the domain name of the network which is connected with the monitor.
Up to 60 alphanumeric characters can be used.
Network Service Settings
Click on "NETWORK SERVICE" on the left-hand column below HOME.
HTTP PASSWORD
Set a password for the HTTP server. The password must be max. 10 characters long. The default
password is 0000.
HTTP PASSWORD
An HTTP PASSWORD is required when logging into the HTTP server.
ENABLE
Set the monitor name as the USER NAME when entering the password.
Commands
Connecting the monitor with RS-232C or connecting to a network via LAN, the control commands transmit and receive between
the monitor and a connected device. It allows for remote control of the monitor from a connected device.
Instructions for both control command types can be found in the external documents.
For details of each command, see the manual on the following website.
https://www.sharp-nec-displays.com/global/index.html
English−46
Advertisement
Table of Contents
