Cleaning Your Ite Hearing Aids; Ite Troubleshooting Guide - Unitron Stride P Pro Manual

Behind-the-ear (bte) and in-the-ear (ite) hearing aid
Hide thumbs Also See for Stride P Pro:
Table of Contents

Advertisement

Cleaning your ITE hearing aids

Use a soft cloth to clean your hearing aid at the
end of each day, and place it in its case with the
battery door open to allow moisture to evaporate.
Ear wax is natural and common. Ensuring your
hearing aids are free of ear wax is an important
step in your daily cleaning and maintenance
routine.
Using the brush that was provided with your
hearing aids, clean ear wax from your hearing
aids everyday.
Never use alcohol to clean your hearing aids.
Do not use sharp tools to dislodge ear wax.
Sticking household items into your hearing aids
can seriously damage them.
Talk to your hearing healthcare professional
about regular appointments to have the wax
removed from your hearing aids.
50

ITE troubleshooting guide

Cause
Possible remedy
No sound
Not turned on
Turn on
Low/dead battery
Replace battery
Poor battery contact
Consult your hearing healthcare
professional
Battery upside down
Insert battery plus (+) side up
Hearing aids
See "Cleaning your hearing
blocked with ear wax
aids." Consult your hearing
healthcare professional
Not loud enough
Low volume
Turn up volume; see hearing
healthcare professional for
models without a manual
volume control or if problem
persists
Low battery
Replace battery
Hearing aids not
See "Putting your hearing aids in
inserted properly
your ears." Remove and reinsert
carefully
Change in hearing
Consult your hearing healthcare
professional
51

Advertisement

Table of Contents
loading

Table of Contents