Turning Your Ite Hearing Aids On And Off; Ite Battery Information - Unitron Stride P Pro Manual

Behind-the-ear (bte) and in-the-ear (ite) hearing aid
Hide thumbs Also See for Stride P Pro:
Table of Contents

Advertisement

Turning your ITE hearing aids
on and off
The battery door acts as an on and off switch.
1.
On:
Close the battery
door fully.
Note: It may take five
seconds before the hearing
aid turns on. Your hearing
healthcare provider can
increase the start up delay
if required.
2.
Off:
Open the battery door
to turn off the hearing aid
and change the battery.
40
1.
2.

ITE battery information

Low battery warning
Two long beeps indicate the hearing aid battery
is low. After the low battery warning, sounds may
not be as clear. This is normal and can be fixed by
changing the batteries.
If you can't hear the low battery warning, your
hearing healthcare professional can change its
pitch or loudness. If you prefer, it can be turned
off entirely.
Your hearing aids are designed to generate a
low battery warning every 30 minutes until you
change the batteries, but depending on the
condition of the batteries, they may die before
another low battery warning occurs. Therefore,
it is recommended that the batteries are
replaced as soon as possible once you hear
the low battery warning.
41

Advertisement

Table of Contents
loading

Table of Contents