Bte Operating Instructions - Unitron Stride P Pro Manual

BTE operating instructions

Your hearing aids may come with two controls
that allow you to further adjust them – a rocker
switch and a push button.
Rocker switch
The rocker switch on your hearing aids
is a volume control.
Volume control
Press up to increase volume
•
Press down to decrease volume
•
As you change the volume level, your hearing
aids will beep.
Volume setting
Suggested volume level
Turning volume up
Turning volume down
Maximum volume level
Minimum volume level
20
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps
Push button
The push button on your hearing
aids can be either a program
control, a volume control or a
combination of both.
Program control
If your push button is a program control, each
time you push the button, you will move to a new
hearing aid program.
Your hearing aids beep to indicate which program
you are in.
Program setting
Program 1 (e.g. automatic program)
Program 2 (e.g. speech in noise)
Program 3 (e.g. easy-t/telephone)
Program 4 (e.g. music)
Easy-t/telephone
DuoLink (if enabled)
Please see the front of this booklet for a listing
of your personalized programs.
Beeps
1 beep
2 beeps
3 beeps
4 beeps
short melody
Opposite ear beeps
the same as side
being adjusted
21