Safety Instructions - AEG COMPETENCE 5211V Operating Instructions Manual

Free standing slot-in electric cooker

Hide thumbs Also See for COMPETENCE 5211V:

Table of Contents

Safety Instructions

To comply with safety regulations manufacturers have to draw your attention to the follow-

ing:

— According to the technical connection conditions of the electricity board serving your

area, the appliance may only be connected to the mains supply by an approved electrical

installer.

— Inthe fixed connection, a device allowing the appliance to be isolated on all poles from the

mains supply with a contact opening width of at least 3 mm must be provided. Suitable

isolating devices are line protection switches, fuses (to be removed from the holder), FI

switches and contactors.

— Please note that in the case of built-in furniture units the plastic coating or the veneer must

be applied with a heat resistant adhesive (100 °C). If the plastic coating and the adhesive

are not heat resistant, it is possible for the coating to deform or become detached, par-

ticularly along the edges of the built-in furniture units.

— In respect of fire protection, the appliance conforms to type Y (IEC 335-2-6). Only app-

liances of this type may be installed on one side of adjacent upright kitchen housings or

walls.

The distance between a hob and fume extractor hood must be of the extent ind-

icated in the installation instructions of the fume extractor hood.

The plinth recess can be adjusted to line up with the furniture plinth of most types of kitch-

ens.

——

° 0

°o@

fe)

IN5211_

10/96

Table of Contents