Advertisement
Brought to You by www.snapwhole.com
Press the Foot pedal all the way down, then swing the Pedal Lock Assembly (14) up and into the
hole on the bottom of the foot pedal (see Figure 5).
The hydraulic system can take in air; when this happens the Hydraulic Wheel Dolly will work
poorly or not at all. Follow the steps below to fix this problem.
1.
Turn the Release Valve (26) 1/2 revolution counterclockwise and spread the Rollers (6) apart
as far as they will go.
2.
Remove the Oil Fill Plug (27)
3
Press up and down on the Foot Pedal (17) about ten times quickly. This will purge the air
from the hydraulic system.
Top off with quality hydraulic fluid if it is too low, and replace the Oil Fill Plug (27).
4.
Figure 4
Release Valve (26)
1.
Before each use, inspect the general condition of the Wheel Dolly. Check for cracking, bend-
ing, wheel damage, and any other condition that may affect safe operation. If a problem
occurs with the Dolly, immediately discontinue its use; never use a damaged Wheel Dolly.
2.
To clean, wipe with a damp cloth. You may use a mild detergent.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNI-
CIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
SKU 94682
LOCKING DOWN THE FOOT PEDAL
BLEEDING INSTRUCTIONS
Oil Fill Plug (27)
INSPECTION, MAINTENANCE, AND CLEANING
PLEASE READ THE FOLLOWING CAREFULLY
For technical questions, please call 1-800-444-3353.
Figure 2
Pedal Lock
(14)
Pedal Lock Assembly (14)
Figure 5
Page 5
Advertisement
