I.link (Ieee1394) Device - Toshiba Satellite A355-SC2902 User Manual

HDMI monitor output function
Problem
No display
If you turn the computer off into Sleep Mode while the display is on TV, the
computer will select either the internal LCD or an external computer CRT
as the display device the next time is switched on.

i.LINK (IEEE1394) device

Problem
i.LINK device does
not function
User's Manual
Procedure
Try adjusting the contrast and brightness controls
on the television.
Press the FN + F5 hot key in order to change the
display priority and ensure that it is not set for the
internal display panel only.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
Check that the cable connecting the external
device to the computer is firmly attached.
Check to ensure that power is being supplied to
the device and that the device is turned on.
Reinstall the drivers required for the device - this
can be achieved by clicking Start, Control
Panel, Hardware and Sound and then clicking
the Add Hardware icon at the left-hand side of
the screen and following the on-screen
instructions.
Restart the computer and the Windows
operating system to re-initialize the device.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
A350/A350D
9-23