Table of Contents
Advertisement
DIGI LINK Ill System Remote controls
¢ You can remotely contro! not only this receiver but also Sherwood compatible components bearing the DIGI LINK II or
Ill logo.
« For system remote control operation, first make the DIGI LINK connections.
SLEEP BUTTON
POWER BUTTON
m@ CD PLAYER SECTION
DISC(CD changer only) — for disc selection
» — to begin play
nt — for pausing play
m ~to stop play or to clear a program
t«<,»~ — for skipping backward or forward
REPEAT A< >B-to play a specific passage
repeatedly
INTRO SCAN - to preview each track only
for 10 sec
INPUT SELECTOR BUTTONS
In the standby mode, when pressing a input
selector button, the unit is turned on automatically
and the desired input source is selected.
SURROUND MODE BUTTON
DELAY TIME BUTTON
MASTER VOLUME/CENTER LEVEL/REAR
LEVEL / SUBWOOFER LEVEL UP/DOWN
(A/V
) BUTTONS
MUTE BUTTON
PRESET SCAN BUTTON
SYSTEM DISPLAY BUTTON
NUMERIC BUTTONS — for selecting preset stations
or entering frequency directly in tuner mode.
For selecting a track or a disc in CD mode.
When selecting a disc, select disc No. (1~5) within 2
sec. after pressing the DISC button.
m@ TAPE DECK SECTION
DECK SELECTOR A, B — for selecting deck A or B
~«, » — to begin forward or reverse side playback
u
—for pausing playback or recording
m
—to stop playback or recording
<<, »»— to wind tape reverse or forward
e —for recording
@ EQUALIZER SECTION
PRESET -— for selecting equalizer pattern.
USER — for adjusting equalizer pattem as desired.
FILE —for selecting desired equalizer pattem in the}
preset or in the user mode.
DISPLAY — for selecting equalizer display.
T.MON — for monitoring the sound of recording or
playback on tape deck.
TEST TONE BUTTON
ADJUST BUTTON
* In the DIGI LINK Ii! remote control system, if pressing PLAY,etc. on CD player or tape deck, CD or TAPE 2 MONITOR
is selected automatically without selecting the input source and then PLAY,etc. starts.
In this case,to listen to TAPE 1, switch off the TAPE 2 MONITOR and select the TAPE 1.
Notes:
¢ Some functions for CD player, tape deck or equalizer may not be available.
¢ For details about functions, refer to the operating instructions of each component.
Giese
a e
Advertisement
Table of Contents
