Table of Contents
Advertisement
Entering video labels
Repeat the steps 3 and 4 to memorize the
eee
rr
rest of up to 8 characters.
* It can be operated only on video input sources such
as DVD, LDP, VCR 1 and AUX/TV.
Select the desired video input source to
Rectifying or clearing a video label
enter its label.
Select the desired video input source to be
rectified or cleared.
INPUT SELECTOR'
INDEX
INPUT SELECTOR'
INDEX
Repeat the steps 2~5 in "Entering video
labels" procedure.
while the digit is flickering.
then the video label is cleared and its video input
a
source will be displayed.
3] Select the first character of the video label
* To clear a video label, make a blank on each digit,
Checking the video components
connected
INPUT SELECTOR/
INDEX
¢ Each time the INPUT SELECTOR/INDEX knob is
* Use this function to check the video components
rotated, the characters which can be selected are total
connected to DVD, LDP, VCR 1 and AUX/TV jacks
45 as follows ;
each.
26 Capital Letters:
ABC
DEFGHIJKLMNOPQRS
+ During play on the video components, press the
TUVWXYZ
VIDEO LABELS and the VCR 1 RECORD buttons
10 Arabic Numerals : 1234567890
simultaneously.
os
9 Special Marks: {>
*
+ ,-/\
VIDLABELS
VOR REC
Memorize
it within
MEMO / ENTER
9
9
6 seconds.
I
fh =F
(ny
+ If the MEMORY/ENTER button is pressed for more
+ The respective input source or its label scrolls on the
than 2 seconds on the character, a dot( - ) will appear
display and you can check its video and audio
:
by the character.
contents in turn as follows;
+ If the MEMORY/ENTER button is pressed without
DVD — LD PLAYER
VCR i —+ AUX/TV FRONT >
selecting the desired character, the digit will be blank.
AUX/TV REAR
* If 6 seconds elapses, repeat again from the step 2.
= DNS
ec oninie lo noceber i iNe viaes
components connected.
Advertisement
Table of Contents
