Panel Facilities And Specifications - Pioneer DVL-909 Service Manual

DVL-909
8. PANEL FACILITIES AND SPECIFICATIONS
¢ For DVL-909/RD/RA,RD/RC, RAM and RL types
m@ FRONT PANEL
DVD/CD disc table
STANDBY indicator
Disc illumination
This light is off when playing discs other than DVDs.
OPEN/CLOSE button
PLAY/PAUSE
>/t button
LD disc table
Display OFF button
Forward >>>}
button
Remote sensor
(FL OFF) STOP m button Hevetss a4
POWER switch
m@ REAR PANEL
Digital Output Jack (Coaxial)
This is used for output of the digital audio signal
recorded on CDs, Video CDs and digital audio LDs.
: P ¥ ' button
Display window Disc Side A/B
Depending on the components connect, noise may amplifier Connect fo the optical jack, and select PCM from the menu,
be generated.
Digital Output
When connecting to an AC-3
compatible component, use the
PCM/Qd jack. Use the PCM jack for
all other components. (Refer to the
chart on the right.)
Connect to the PCM/OIO jack, and select PCM/DOLBY DIGITAL from the menu.
AC-3 compatible
amplifier
Optical} Connect to the optical jack, and select PCM/DOLBY DIGITAL from the menu.
Optical Digital Output
Audio optical digital output. Switchable between
PCM/DOLBY DIGITAL and PCM output.
Video output jacks
$2 Video output_,
jacks
TV SYSTEM switch
Audio output jacks
There are two sets of outputs, 1 and 2, which you
can simultaneously connect. Connect 1
and 2 to your AV amp.
106
Control output jack
Control input jack Power cord connection terminal.
to the TV,