Panel Facilities And Specifications - Pioneer DVL-919 Service Manual

DVL-919

8. PANEL FACILITIES AND SPECIFICATIONS

FRONT PANEL
The followiing illustration shows the Flat blade 2-pin AC plug
model.
Standby indicator (STANDBY)
STANDBY/ON switch
(Flat blade 2-pin AC plug model)
Power switch (POWER)
(Round blade 2-pin AC plug model)
DISPLAY WINDOW
When you press the FL DIMMER button, the brightness of the
display window changes among the following settings.
Bright = Semi-dark = Dark =off
±
Indicates GUI operation is
being performed.
This lights during play of a
disc with a sampling
frequency of 96 kHz.
Indicates that a title
is being displayed
Indicates the playback
mode, title, type of disc,
etc.
86
Disc illumination
Turned off when a disc other
than a DVD is played back.
DVD/LD/CD disc table
Display window
Remote sensor
Disc Side A/B
button
Dimmer (FL DIMMER)
button
Use this button to
adjust the display
window's brightness or
to turn off the display.
Indicates Multi-Angle
playback is in progress.
96 kHz GUI
TITLE
Indicates that a chapter/
track is being displayed
DVD/CD open/close 0 button
LD open/close 0 button
Play/Pause 6 button
Stop 7 button
Forward ¡ ¢ button
Reverse 4 1 button
Indicates location for Last
Memory is being recorded
in memory.
LAST MEMO CONDITION
ANGLE
CHP/TRK REMAIN TOTAL
Indicates total
playback time of side
Indicates remaining
playback time
Indicates that playback
settings (condition) have
been memorized.
Indicates Dolby Digital
playback
DOLBY
DIGITAL