Pioneer PD-T305 Operating Instructions Manual page 17

TO END PLAYBACK BY PERFORMING FADE-OUT AT A DESIRED TIME
23 © 27 © 30
% ra
45 - 37
|
| A, va
| ti< Jo
i {PD-T505 only)
;
1 4 4
LI 4
| 4 TIVE
EADIE
ve
This feature allows you to perform recording onto cassette tapes
up to the full length of the tape. It is also convenient when you
wish to listen to a disc for a certain length of time only.
® Perform designated time playback. When the playback time
comes to its end, the sound will gradually fade out without any
distracting electronic noises.
1. Press the TIME FADE button @.
2. Use disc select button @ to.designate which disc
is to be programmed.
3. Press [I<] or [>>1] buttons (7) to set the desired
tape length.
@ Each time the buttons are pressed, the time setting will
change in the following order:
23. 27 — 30 — 37 & pred
Unit: Minutes
4. Press TIME FADE button (2).
When the number buttons are used (PD-T505 only)
4. Press TIME FADE button (2.
2. Use disc select button (5 to designate which disc
is to be programmed.
3. Press the number buttons to set the length (time)
of the tape desired.
rs
To perform edit recording from multiple discs :
(MULTI-DISC TIME FADE EDIT)
When the tape length (designated edit time) is longer than the disc
playback time, the automatic eject function wiil operate, allowing
you to change discs and program tracks up to the full designated
time.
For example:
Multiple 8 cm CDs can be recorded onto a single C46 (23 minutes
per side) cassette tape (Multi-disc time fade edit).
Remaining time.
joel
C46 Ist disc 2nd disc 3rddisc 4th disc 5th disc
roe | en A hel we at
ate
17
<PRBI120>
bes