Pentax ZOOM 280-P Operating Manual page 40

Hide thumbs Also See for ZOOM 280-P:
Table of Contents

Advertisement

Compose the scene
Compose the scene and frame the subject
with the AF frame. When the shutter release
button is depressed halfway down, the green
lamp lights up and the focus is locked. Even If
you lift your finger off the shutter release
button, the focus will remain locked for 10
minutes and the green lamp will blink slowly.
* Focus cannot be locked with the Remote
Control's shutter release button.
* If you wish to focus on another subject af¬
ter the focus is locked, use the focus-lock
technique again to focus on the subject.
You cannot change the currently selected
mode with the mode, drive, red-eye reduc¬
tion flash and Image buttons as long as the
focus is locked.
* Focus lock is unlocked when the Remote
Control is attached to the camera.
* When the focus is not locked, the subject
framed in the AF frame will be in focus
when the Remote Control's shutter release
button is depressed.
36
Taking Pictures
Aim the Remote Control Projector towards the
Remote Control Receiver on the camera, and then
depress the Remote Control's shutter release button
fully to release the shutter.
* If the Self-Timer mode is set on the camera, the
Self-Timer lamp blinks for 3 seconds quickly and
then the shutter is released.
Operating
Distance of the Wireless
Remote Control
From the camera's front: within approx. 5m right
from the front of the camera
From the camera's rear: within approx. 0.7m right
from the center of the back
• Remote Control may not work in a backlit situ¬
ation. In this case, use the camera's shutter re¬
lease button in the Self-Timer mode to take pic¬
tures.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zoom 280-p date

Table of Contents