Using Wireless Remote Control - Pentax ZOOM 280-P Operating Manual

USING THE WIRELESS REMOTE CONTROL
This camera is equipped with a Wireless Remote
Control, allowing you to adjust the focal length In
steps of 28, 50, 80mm and trip the shutter at a dis¬
tance.
• Use a tripod when shooting with the Wireless
Remote Control.
• When the Remote Control is used to take pic¬
tures, either shooting mode of the Auto and
Single-Frame, Self-Timer or Multi-Exposure
mode can be used in combination with any of the
exposure modes and auto focus modes.
• Attach the Remote Control to the camera when
not in use.
• Use the Remote Control to take pictures in the
Bulb mode to avoid camera shake. While holding
the Remote Control's shutter release button, the
shutter remains open. When the Remote Control
Projector is not aimed at the camera's Remote
Control Receiver or you lift your finger off the
Remote Control's shutter release button, the
shutter is closed.
Removing the Wireless Remote Control
Slide out the Wireless Remote Control in the direc¬
tion of the arrow while holding down the Remote
Control's release lever. After it is removed, the
( KM) symbol appears on the LCD panel to indicate
that it can now be used.
34