Pentax ZOOM 280-P Operating Manual page 10

Hide thumbs Also See for ZOOM 280-P:
Table of Contents

Advertisement

4. OPERATING A 28-80mm ZOOM LENS
Move the zooming (ever to the right { f )
or the left ( 444 ) to zoom the lens to the
desired setting, release the zooming lever,
and then depress the shutter release but¬
ton fully to take pictures.
Step Zoom and Continuous Zoom
Step Zoom: Moving the zooming lever
slightly zooms the lens to adjacent steps,
causing slight composition changes.
Continuous Zoom: Moving the lever fully
causes continuous lens zooming, which
drastically changes the composition.
* With the step zoom, the lens stops at
lens focal length of 28, 35, 42, 50, 60, 70,
and 80mm. To stop at the next step, re¬
turn the zooming lever to its original po¬
sition, and then slightly move it again.
* When you move the zooming lever or
the shutter release button is depressed
halfway down, the lens focal length is
displayed on the LCD panel.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zoom 280-p date

Table of Contents