Table of Contents
Advertisement
aura/
v
/(J
a* 0 „)
Setting the exposure compensation
Hold down the Image button for about 2 seconds to
make the exposure compensation mark <8), (Q)
and {^) blink. While holding down the Image but¬
ton, move the zooming lever to the right or the left
until the desired compensation value appears. Hold¬
ing the zoomirig lever fully to the right or the left will
advance the digit continuously. After the compensa¬
tion value has been entered, the compensation
mark <
or (^) appears on the LCD panel even if
the lever is released, indicating that the exposure
compensation is activated.
Exposure compensation does not work in the
Bulb or Bulb-Synch mode.
To confirm the compensation value, hold down
the Image button for approx. 2 seconds.
TAKING PANORAMIC FORMAT
PICTURE
4
You can switch between the panoramic for¬
mat and standard format picture taking mode
in the middle of the roll by just moving the
panorama mode selector lever. The pano¬
ramic format picture allows horizontally posi¬
tioned dynamic pictures to be taken 03 x
36mm on film).
1 Switching to the panoramic format
picture
Slide the panorama mode selector lever in
the direction of the arrow to set the pano¬
ramic format mode.
When the format is switched to panorama
the viewfinder switches to the horizontal
panoramic format frame.
Advertisement
Table of Contents
