JVC RX-308BK Manual page 8

RX-308BK
RX-309TN
COMPU LINK-3 COMPU LINK-3 SYNCHRO jacks on the back of the receiver connect the COMPU LINK
Connections remote.control system. This system connects other JVC audio components with the receiver
to make listening andrecording more convenient. Touse this system, attach the cables provided
with your JVC components to the COMPU LINK-3 SYNCHRO jacks on the rear panel of each
component. Then connect the cables to the receiver.
NOTES:
¢ COMPU LINK-3 is an upgraded version of COMPU LINK-1. If your equipment
provides COMPU LINK-I jacks, you can still connect your equipment, but slight
imperfections may result. Automatic Power ON/OFF, for example, may not always
function properly.
¢ Refer to page 18 for details about the COMPU LINK remote control system.
* COMPU LINK does not work on Tape Deck 2.
CD PLAYER _ TAPEDECK 1
TURNTABLE
Other Audio Connections Use the socket on the back of the receiver to connect the power supply of any audio components.
By pressing the POWER switch on the remote control, you can turn the receiver, and all
connected components, on or off at the same time.
SWITCHED
In the United States, AC outlets have a capacity of 150 watts.
A\ CAUTION! Do not connect any components that consume more power than the
AC outlets capacity. This capacity is indicated below the socket on the back of
the receiver.
Page 6
1-8 (No.20375)