Table of Contents
Advertisement
System connections
Make connection as shown below. When connecting the related system components, refer also to the instruction
manuals of the related components.
Do not plug in the power lead until all connections are completed.
SPEAKER IMPEDANCE SELECTOR
(Except for some areas.)
Power amplifier KM-992
To AC
TT
outlet
e_T
AC voltage selector switch
Unswitched AC outlets
(Except for some areas.)
Control amplifier KC-992
ACTIOAROV
ACPO Ba OV.
S0,/aGH2
SWITCHED
TOTAL GBOW MAK.
= AT TTOV-1a0V~ =u AC 220V-240V-
im i |
on
©©66|©©
To AC
outlet
To AC outlet
'
Becta
UNSWITCHED AC outlet
Unit destination
Shape of the AC outlet
The power of the component
connected
to this
kind of AC outlet can be switched ON/OFF regard-
(t_10)
less of the POWER key on the main unit.
tn,
=
For other countries
Notes:
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connec-
tion cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
GG
kn0-992 (Eni
Advertisement
Table of Contents
