Table of Contents
Advertisement
2. Tighten the wire-clamp screws for preventing the wires from loosening.
1. The wire gauge for the terminal block should be in the range
between 12 and 24 AWG.
2. The IGS-1000-8T4X supports DC input range of 9V to 48V.
The IGS-1000-8UP4X supports DC input range of 48V to
54V.
To avoid damage, please use the IGS-1000 Series under its
specification.
PWR1 and PWR2 must provide the same DC voltage while
operating with dual power input.
10
1
2
3
Power 1
Alarm
+
-
4
5
6
Power 2
+
-
Advertisement
Table of Contents
