Table of Contents
Advertisement
50
Getting Started
Setting up your computer
Removing a memory module
1
Follow steps 1 through 5 in
(optional)" on page
2
Gently pull up on the module to disconnect it, then gently pull
it out of the slot.
3
Complete the procedure by following steps 9 through 11.
Connecting a mouse
You may want to use a mouse instead of the computer's built-in
pointing device.
To connect a USB mouse, plug the mouse cable into one of the
USB ports.
Connecting a printer
CAUTION: Connecting the printer cable while the computer
is on may damage the printer, the computer, or both.
Before connecting a printer, you need to know whether it uses a
serial or a parallel interface. Check the printer's documentation. If
the printer can be switched between serial and parallel mode,
choose parallel because it is faster.
You also need a suitable printer cable, which may come with your
printer. Otherwise, you can purchase one from a computer or
electronics store.
NOTE: If your printer is ECP- or IEEE-compliant, make sure
your printer cable is an IEEE 1284 cable.
"Installing additional memory
47.
Advertisement
Table of Contents
