Table of Contents
Advertisement
English
In standby mode, all commands other than the PON command are
PON
Power ON
ignored,
• The PON command is ignored during lamp ON control,
• If a PON command is received while the cooling fan is operating after
the lamp has switched off, the lamp is not turned back on again straight
away in order to protect the lamp.
POF
Power OFF
IIS
INPUT
Parameter: (page 23)
SVD = S-VIDEO IN
VID = VIDEO IN
HD1 = HDMI1 IN
RG1 = PC IN
HD2 = HDMI2 IN
YUV = COMPONENT IN
SCT = SCARTIN
OMN
MAIN
Displaying Main menu.
OEN
ENTER
Activating the selected items in menu mode.
OBK
RETURN
Returning to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = A button
OCL = ◄ button
OCD = T button
OCR = ► button
OLE
LENS CONTROL
Activating the LENS CONTROL menu.
OST
DEFAULT
Resetting to the factory default setting, (page 22)
OFZ
FREEZE
Freezing the projected screen.
Parameter:
0 = OFF
1 = ON
OOT
SLEEP
Setting the duration of time to turn off the power automatically.
0 = OFF
1=60 min.
2 = 90 min.
3 = 120 min.
4 =150 min.
5 =180 min.
6 = 210 min.
7 = 240 min. (page 25)
OSH
SHUTTER
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
OVM
PICTURE
Activating the PICTURE menu. Send the command to switch menu items,
(page 28)
OWM
WAVEFORM
Activating the WAVEFORM.
Parameter:
(page 24)
0 = OFF
1 = FULL SCAN (Y)
5 = SINGLE LINE SCAN (Y)
2 = FULL SCAN (R)
6 = SINGLE LINE SCAN (R)
3 = FULL SCAN (G)
7 = SINGLE LINE SCAN (G)
4 = FULL SCAN (B)
8 = SINGLE LINE SCAN (B)
VS1
ASPECT
Switch the aspect ratio, (page 23)
VPM
PICTURE MODE
Parameter: (page 25)
NAT=NATURAL
NOR=NORMAL
DYN=DYNAMIC
CN1=CINEMA1
CN2=CINEMA2
CN3=CINEMA3
VID=VIDEO
1
English - 47
Advertisement
Table of Contents
