When Writing Or Rewriting - Toshiba Qosmio G10-105 User Manual

I
In writing to a DVD-R/-RW, DVD+R/+RW or DVD-RAM disc, some disc
space is required for file management, so you may not be able to write
the full capacity of the disc.
I
Since the disc is based on the DVD standard, it might be filled with
dummy data if the written data is less than about 1 GB. Even if you write
only a small amount of data, it might take time to fill in the dummy data.
I
DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.
I
When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
I
Be sure to connect the AC adaptor before you write or rewrite.
I
Before you enter Standby Mode/Hibernation Mode, be sure to finish
DVD-RAM writing. Writing is finished if you can eject DVD-RAM media.
I
Be sure to close all other software programs except the writing
software.
I
Do not run software such as a screen saver, which can put a heavy load
on the CPU.
I
Operate the computer in the full-power mode. Do not use power-saving
features.
I
Do not write while virus check software is running. Wait for it to finish
and then disable virus detection programs including any software that
checks files automatically in the background.
I
Do not use hard disk utilities, including those intended to enhance hard
disk drive access speed. They may cause unstable operation and data
damage.
I
CD-RW (Ultra Speed +) media is not available. If used, data may be lost
or damaged.
I
DVD+R DL media is not available (Except UJ-831 and GSA-4080N).
I
Write from the computer's HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
I
Writing with software other than RecordNow! and InterVideo WinDVD
Creator Platinum are not recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/
RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
I
Do not perform any of the following actions when writing or rewriting:
I
I
I
I
User's Manual
Change users in the Windows XP operating system.
Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Operating Basics
4-14