Toshiba Qosmio G10-105 User Manual page 133

You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*1
Only applicable to models supplied with two hard disk drives.
*2
In this instance, CD-ROM refers to the fixed optical media drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in
HDD1, Built-in HDD2, CD-ROM, FDD, Network (LAN), boot.
A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want and
press Enter.
User's Manual
U Selects the USB floppy disk drive.
N Selects the Network.
1 Selects the primary HDD1.
2
Selects the primary HDD2
C
Selects the CD-ROM
*1
.
*2
.
HW Setup
7-3