Table of Contents
Advertisement
SoftAP
(Depending on model)
• SoftAP is similar to Access Point. When this value is On, Wi-Fi Service application is displayed at the launcher bar. SoftAP is activated when user selects On
in the Wi-Fi Service application.
• Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model)
Use Default
• If you want to use default password(this password was generated randomly), you must select 'Enable' in this item.
Security Key
• If you want to change default password, you need to change 'Use Default' value into 'Disable' .
Wi-Fi Signal Strength
• You can control wireless signal strength on SoftAP. This is controlled by 5 step. If you select 'Not Used' , wireless signal strength will be set to Max value.
Wi-Fi Channel
• You can control the wireless channel in SoftAP mode. It is controlled by 1 to 11 channels(2.4GHz). The 5GHz channel is controlled by the channel
supported by the country where it is set. However, DFS channels cannot be set. If you select'Auto' , the SoftAP' s wireless channel is set to a random
channel.
Mode
(Depending on model)
• You can select NAT(Network address translation) mode and Bridge mode for Soft AP.
Security Type
(Depending on model)
• This menu is activated only when Bridge mode is selected.
• Type of security authentication protocol required for wireless connectivity
• WPA2-PSK, 802.1X EAP, and OPEN are available from this menu.
Radius Server IP, Radius Server Port, Radius Server Key
(Depending on model)
• This menu is activated only when Bridge mode is selected and 802.1X EAP is selected.
• If you want to use 802.1X, you must enter the IP address of the authentication server that manages the user' s credentials, as well as the Port and Key
information.
VLAN ID
(Depending on model)
• This menu is activated only when Bridge mode is selected.
• SoftAP VLAN ID is needed when you want to separate TV packets and SoftAP packets.
• The packets via SoftAP are tagged when the packets go through LAN port to external network.
• It is not compatible with Network
VLAN ID. (SoftAP VLAN is not available if LAN port or AUX port in VLAN ID is set.)
53
Advertisement
Table of Contents
