1. Manuals
  2. Brands
  3. LG Manuals
  4. LED TV
  5. WS96 Series
  6. Installation manual

LG WS96 Series Installation Manual

Hide thumbs Also See for WS96 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
US66*
US76*
WS96*
ES96*
UR76*
*mfl71684501*
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
(2102-REV21)

Advertisement

Table of Contents
loading

Related Manuals for LG WS96 Series

Summary of Contents for LG WS96 Series

  • Page 1 INSTALLATION MANUAL LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. US66* US76* WS96* ES96* UR76* *mfl71684501* www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    - TV Configuration Options - Auto Start - Configure Pro:Centric Server - PreLoaded App - Standard Pro:Centric Server Settings - Website Shortcut - LG Pro:Centric Cloud Settings - Input Shortcut Installation Menu Settings - Hotel Directory - Portal Editor Installation Menu...
  • Page 3 IR Codes External control device Setup RS-232C Setup Type of Connector : D-Sub 9-Pin Male RS-232C Configurations Communication Parameters IR OUT Using Guide - Suitable / Not Recommend remote-controller data format - IR Receiver specifications Command Reference List Transmission / Receiving Protocol...

  • Page 4: Location And Function Of Controls

    Location and Function of Controls LED Clock Connection (Depending on model) Parts and Button This TV can be connected to a LED Clock via the CLOCK port. CLOCK LED Clock (*Not Provided) Basic functions Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold All running apps will close.

  • Page 5: First Use Wizard

    First Use Wizard * Images shown may differ from your TV. (Depending on model) • There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by Start button. (Normal Configuration is the default focus item.)

  • Page 6: Basic Settings

    Basic Settings (Depending on model) This menu is for basic settings related to language, network, portal, voice service coverage and programme tuning without SI (Pro:Centric) setting. There are four steps for it. Language & Location (Depending on model) • Select the Language and Country. Some countries need to select the Time Zone.

  • Page 7: Network Settings

    Network Settings (Depending on model) • Set Network connection. You can connect easily to wired/wireless network. (“Network Settings” on page 27) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK)

  • Page 8: Portal Settings

    Portal Settings (Depending on model) • Set the Portal Mode and Portal Auto Start. Portal Mode (Depending on model) • You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Portal’ (Use editable Portal), or ‘None’ (Do not use portal). Portal Auto Start •...

  • Page 9: Voice Service Coverage

    Voice Service Coverage (Depending on model) • Set the voice service coverage. You can set LG Service Country and Service Area Postcode(Depending on model) for voice service.

  • Page 10: Data Cloning

    Data Cloning (Depending on model) Access Data cloning menu of TV Manager application for applying cloning file. Solution Settings (Depending on model) The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local”...

  • Page 11: Tv Configuration Options

    TV Configuration Options (Depending on model) From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the wizard or use a USB memory device to configure the TV, you may first wish to set the Room Number on the TV. Also, you can configure the network environment.
  • Page 12 • If you intend to apply the files via USB, use USB Configuration option to access TV Manager app. (“TV Manager” on page 48) • If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network Settings” on page 27) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW.

  • Page 14: Configure Pro:centric Server

    Configure Pro:Centric Server (Depending on model) You can select two options. • Standard Pro:Centric Server Settings : Default Automatic / Manual Pro:Centric Server Configuration • LG Pro:Centric Cloud Settings : Installation Code based simple installation for Cloud solution...

  • Page 15: Standard Pro:centric Server Settings

    Standard Pro:Centric Server Settings (Depending on model) Automatically for Setup This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data programme, select the Next.
  • Page 16 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
  • Page 17 Manually for Setup Please select the Manual Pro:Centric. Configure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)
  • Page 19 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.

  • Page 20: Lg Pro:centric Cloud Settings

    LG Pro:Centric Cloud Settings (Depending on model) From the Pro:Centric Cloud setting screen, You can input the installation code that issued from Pro:Centric Cloud server. Server Searching • Server search succeed : The message “Server Found [property name]” is displayed. And the search button changes to the next button.

  • Page 21: Installation Menu Settings

    • After clicking the next button, Downloading the Pro:Centric application files takes few minutes. Download Complete • After the installation is completed, the following screen will be displayed. Installation Menu Settings (Depending on model) Access Installation menu for commercial feature settings.

  • Page 22: Installation Menu

    The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’ . The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators.

  • Page 23: Lg Hotel Mode Setup

    LG Hotel Mode Setup When ‘LG Hotel Mode Setup’ is set to On, all functions of Hotel Mode apply. Power On Status • Decide to select working status of TV Set when turn on main power. • You can select PWR, STD, LST.

  • Page 24: Volume

    - When selected to 'On' , if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used. - Access to a volume in ‘Timer Power On’ must be fixed to start volume when ‘LG Hotel Mode Setup’ (On) and ‘Start Volume’ (Off, 0 ~ 100) were set simultaneously.

  • Page 25: Limited Mode

    Limited Mode • Configure TV function’ s limitation. When selected to ‘On’ , following sub-menus will be worked by below. Setup Menu • Permit to tune and manage programmes. Programme Change (Depending on model) • Decide to change programme or not. Menu Display •...

  • Page 26: Power On Default

    Power On Default • Set the programme to display, etc. when turn on power. • When set to Off, it is not applied to the subordinate Input, Programme, A/V Setting, Aspect Ratio menu. • When set to On, it can set by entering the subordinate menu. Input •...

  • Page 27: Network

    Network (Depending on model) MAC Address • Displays the MAC address (not customizable). Network Settings One-click network connection • Connects easily to a network. • This menu supports to connect to an available network. To connect to a network through Set Expert •...

  • Page 28: Lg Connect

    LG Connect (Depending on model) • Sets the 'LG Connect' function to On or Off. - You can connect TV via 'LG TV Plus' app in smart device. - Default setting is 'On' . IP Stream Control (Depending on model) Audio PTS Offset •...

  • Page 29: Pro:centric

    Pro:Centric (Depending on model) Server Type (Depending on model) • You can set to ‘Standard Pro:Centric Server’ , ‘LG Pro:Centric Cloud’ . • If you select ‘LG Pro:Centric Cloud’ , you can configure Cloud. Installation Code (Depending on model) • If you input the 6-digit installation code, the server is automatically searched.

  • Page 30: Media Type

    Media Type (Depending on model) • Sets the media type to RF or IP. • The default value is RF. (Depending on model) • Data Channel Freq (KHz) - Sets the RF frequency at which the Pro:Centric data is received. •...

  • Page 31: General

    General Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When set to ‘Enable’ , You can adjust ‘Number of RCU’ menu. Number of RCU • Number of RCU value range 1~16. (When ‘Select RCU’ is set to ‘Enable’) •...
  • Page 32 Meeting Room Solution (Depending on model) • Set to ‘On’ or ‘Off’ . • This mode sets whether to include the Office Meeting Mode Application in Home Launcher. • If the SoftAP at Media Share is set to “Off”, the Meeting Room Solution is set to “Off” and disabled. RS232 DC Power Outlet (Depending on model) •...
  • Page 33 One Channel Map (Depending on model) • If set to ‘Enable’ , the TV will operate as below. - A. When the TV is auto-scanning, it searches both air and cable channels. - B. User can assign a channel number him/herself by manual scan. - C.
  • Page 34 DVB-C Bandwidth (Depending on model) • If country is 'Philippines' , 'DVB-C Bandwidth' menu will be shown. • Select the bandwidth of cable tuning (6 MHz/8 MHz). The default is 6 MHz. Additional Pixel Refresher (Depending on model) • If set to Power Plug In, TV always does pixel refresh when AC power on. •...
  • Page 35 • You can configure the Sound Out to be set after power on. • You can select Off, TV Speaker, Optical, LG Sound Sync., HDMI ARC • If you set this option to Off, the TV maintains Sound Out after power on.

  • Page 36: External Speaker

    External Speaker (Depending on model) Volume Control • Selects the volume control method of an external speaker. • You can select ‘Off’ , ‘Int Variable’ , ‘Fixed’ or ‘Ext Variable’ . (Depending on model) • Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 2 Watts. •...

  • Page 37: Power Saving

    • You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC]. • If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. • If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document) •...

  • Page 38: Clock Setup

    • If you use following functions via TVLink-HCEC, HTNG Hotel mode will be set as “Yes” automatically. - Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume. • Even if ‘LG Hotel Mode Setup’ is set as No, above settings are still effective. Clock Setup...

  • Page 39: Crestron

    • • TV : Clock is synchronized using particular TV programme. - Input (Depending on model) » You can select 'Input' according to 'Clock Source' . » You can select 'RF' or 'IP' when Clock Source is 'Pro:Centric' . » You can select TV source when Clock Source is 'TV' . »...

  • Page 40: Portal Settings

    Lock Mode • USB - If set to ‘Enable’ , USB devices do not work in relative features. (Exclude S/W update) • Factory Reset - If set to ‘Enable’ , 'Reset to Initial Settings' item in the user menu is disabled. Password Change •...

  • Page 41: Portal Mode

    Portal Mode (Depending on model) • You can select 'Default Portal' (Use webOS default portal), 'Customizable Portal' (Use editable Portal), or 'None' (Do not use portal). Auto Start (Depending on model) • You can select 'Off' , 'Website Shortcut' , or 'Portal Mode' . •...

  • Page 42: Hotel Directory

    Shortcut Icon • You can select default icon, downloaded icon or Download(Go to TV Manager). • You can download the shortcut icon at TV Manager app. Tile Color (Color Code) • You can change Input Shortcut app tile color using RGB color code. Hotel Directory (Depending on model) •...

  • Page 43: Portal Manager

    » RSS Feed - You can select whether to show RSS Feed at the bottom - You can enter RSS Feed URL - You can select RSS Feed scroll speed ( Slow, Normal, Fast ) • Reset - You can reset modifications •...
  • Page 44 Group Management • Creating a New Group Click Add New Group. Enter a group name. Click Add Device, select the devices you wish to add to the group, and add them. Click Done, and you will see that a new group has been created. •...

  • Page 45: Media Share

    Media Share (Depending on model) Smart Share (Depending on model) • Smart Share enables DLNA function. If this value is enabled, TV acts as Media Player and displays Media Server contents through Smart Share app. Screen Share (Depending on model) •...

  • Page 46: Softap

    SoftAP (Depending on model) • SoftAP is similar to Access Point. When you enable this function, TV acts as an Access Point. • Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model) Use Default •...

  • Page 47: Beacon

    Beacon (Depending on model) • This option enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (On/Off Toggle): enables the Beacon feature. • The iBeacon/Eddystone Type Beacon features are supported. iBeacon • Beacon UUID (hex): Set the UUID. Field1: 4byte hex value (8 digits) Field2: 2byte hex value (4 digits) Field3: 2byte hex value (4 digits)

  • Page 48: Tv Manager

    TV Manager * Images shown may differ from your TV. You can update files from USB to TV through the TV manager. Diagnostics (Depending on model) • Sets Enable or Disable. When it is set to Disable, user can’t control TV via RMS. The changed setting is applied after reboot.
  • Page 49 Ez Download • Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Media files, Micom, Pro:Idiom M Key. (Depending on model) - Images, Icon, Pro:Idiom M Key file and Software Update files should be copied into the folder named LG_DTV on the USB. »...
  • Page 50 • Press button to display storage usage information. • Press the “Clear Storage” button to delete the downloaded media files.
  • Page 51 Import Clone File • Once the internal TV data and its programme map information are written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card. The user should not turn TV off nor unplug the USB memory card while processing. The following reference images might be slightly different.
  • Page 52 Export Clone File • “Export Clone File” creates “TLL” file in USB root folder. “TLL” file can be used to “Import Clone File”. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following reference images might be slightly different.

  • Page 53: Usb Download Menu

    USB Download Menu USB Cloning • An Installation can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Installation Menu settings, User A/V settings and the programme Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead.
  • Page 54 Image Download (Depending on model) • The download sequence is Image Download Select Image(s) Download. • The target file is located in LG_DTV folders. • Press the "Clear Storage" button to delete the downloaded images. - Boot Logo Image (Depending on model) »...
  • Page 55 Icon Download (Depending on model) • Images is located in LG_DTV folder. • If you updates the images, original images will be removed. • The download sequence is Icon Downalod Select Images Download. • Icon Image can download only one file. •...
  • Page 56 Video Download (Depending on model) • Media files is located in LG_DTV folder. • The download sequence is Video Download Select media file Download. • Media files can only download one file each. • If you updates the video file, original file will be removed. •...
  • Page 57 Software Update ► Update TV Software • This feature updates TV software through the EPK file in USB. • The target file is located in LG_DTV folder. • The download sequence is Software Update Update TV Software Select file(EPK) Update. ►...

  • Page 58: Ir Codes

    IR Codes • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button (POWER) Remote control Button (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button (Q.

  • Page 59: External Control Device Setup

    External control device Setup ► B Type RS-232C Setup RS-232C IN (CONTROL & SERVICE) (Depending on model) • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

  • Page 60: Rs-232C Configurations

    RS-232C Configurations IR OUT Using Guide Suitable / Not Recommend remote-controller data format 7-Wire Configurations (Standard RS-232C cable) Item Formats Suitable data format NEC, RC5, Toshiba Continuous data format Not recommend data format (short burst/gap signal) IR Receiver specifications Carrier frequency 37.9 KHz Peak Wavelength 940 nm...

  • Page 61: Command Reference List

    IR output signals will be suppressed automatically by IR receiver. (Depending on model) • In this case, LG does not guarantee IR working function. • To make sure of this matter, here are two methods as below. Data - Use the remote-controller with suitable data...

  • Page 62: Transmission / Receiving Protocol

    Transmission / Receiving Protocol 1 Power (Command: k a) ► To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Off [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 01 : On [Command1] : First command to control the TV. (j, k, m or x) [Command2] : Second command to control the TV.
  • Page 63 3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : Screen mute on (Picture off) Data Min : 00 to Max : 64...
  • Page 64 10 Sharpness (Command: k k) 14 Colour Temperature (Command: x u) ► To adjust the screen sharpness. ► To adjust Colour Temperature. You can also adjust Colour Temperature in You can also adjust sharpness in the picture settings. the picture settings. Transmission Transmission [x][u][ ][Set ID][ ][Data][Cr]...
  • Page 65 16 Auto Configuration (Command: j u) (Only RGB support model) 18 Tune Command (Command: m a) ► To adjust picture position and minimize image shaking automatically. It ► Select channel to following physical number. works only in RGB (PC) mode. Transmission Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr]...
  • Page 66 21 Control Backlight (Command: m g) 23 Channel(Programme) Block/Unblock (Command: m d) ► To control the backlight. ► This command may work differently depending on model and signal. Transmission Transmission [m][g][ ][Set ID][ ][Data][Cr] [m][d][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Data 03][Data 04][Cr] Data Min : 00 to Max : 64 [Data 00] : Physical Channel Number [Data 01][Data 02] Channel Data...
  • Page 67 * Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE :...

This manual is also suitable for:

Us76 seriesUs66 seriesEs96 seriesUr76 series43ut782v0zc.aeuz55et961h0za.aeu

Table of Contents