Fail Over; Play Via Url; Ntp Server Setting - LG 75UR640S3ZD.AEU Installation Manual

28
Meeting Room
• Input Shortcut
- Refer to Installation Menu
• Network Ready
- Monitor is turned off, but you can control power internally through the network.
• WOL
- Refer to Installation Menu
• DPM
- Refer to Installation Menu

Fail Over

• Set the priority of the input devices when a fault occurs.
- Fail Over : Turns on or off.
- Input Priority : Set the priority of input sources for fail over.
- Reset : Reset to initial settings.
• The input will change to Live TV when all input sources have no signal and AV Jack is not connected.
• SIMPLINK, Auto Sensing and Fail Over cannot work simultaneously. If SIMPLINK or Auto Sensing is set to On, Fail Over is automatically set to Off.

Play Via URL

• Play content you want to play automatically through the built-in web browser.
- URL Loader: Turns Play via URL on or off.
- Set URL : Enter the URL address to display automatically.
- Preview : Preview your desired website by accessing the specified URL.
- Save : Save the specified URL.
- Reboot to Apply : Restarts the TV after saving the specified URL.
- Reset : Reset to initial settings.

NTP Server Setting

• Allows you to set other NTP servers other than the basic NTP server.
Portal Settings Input Shortcut. (See p. 47)
Network Wake On LAN. (See p. 31)
General Configuration Setup DPM. (See p. 38)