Frigidaire PCFG3670AF Installation Instructions Manual page 17

36" FULL GAS RANGE INSTALLATION INSTRUCTIONS
The flame-spreader crown must be centered on the
burner skirt.
The burner cover must be leveled and centered with
respect to the burner skirt.
Each burner component must be positioned horizon-
tally and must correctly interlock with each other.
Check that they are fitted correctly by moving each
component gently. If the components do not fit cor-
rectly or are inclined, adjust the position of each
component until it remains fixed in position.
Wall and floor attachment
WARNING
CAUTION
WARNING
Positioning the bracket using the template:
1. Choose the correct side of the template, based
on the model.
17
Electrical shock hazard
• Use extreme caution when
drilling holes in the wall or
floor. There may be con-
cealed electrical wiring
behind the wall or under the
floor.
• Identify the location of the
electrical circuits that could be
affected by the installation of
the anti-tip device, then turn
off power to these circuits.
• Failure to follow these instruc-
tions may result in electrical
shock or other personal injury.
• Contact a qualified installer or
contractor to determine the
proper method for drilling
holes through the wall or floor
material (such as ceramic tile,
hardwood, etc.)
• Failure to follow these instruc-
tions may result in damage to
wall or floor coverings.
Visually check from the inside
of the drawer that the wall/floor-
mounted bracket is inserted
into the appropriate lateral hook
(left side).