Frigidaire PCFG3670AF Installation Instructions Manual page 15

36" FULL GAS RANGE INSTALLATION INSTRUCTIONS
3. Remove the tightening screws (5), the cover
plate (6) and the gasket (7).
4. Remove the internal (8) and external (9) nozzles
and replace them with the LPG nozzles (see
"LPG nozzles table (Pressure in W.C.P.: 10")").
CAUTION
This procedure must be performed
for every burner.
5. Refit the burner components following the above
instructions in reverse.
Replacing the oven burner nozzle
CAUTION
Take care not to damage the ther-
mocouple or the igniter when doing the following
operations.
1. Open the door and remove all the accessories
from inside the oven.
2. Remove the shelf.
3. Remove the oven burner fastening screws from
the base.
4. Gently lift the burner at the side and pull it
towards you to remove it from its seat.
5. Replace the nozzle using a 7 mm socket wrench;
install the most suitable one for the type of gas
used.
NOTE:
The tightening torque of the nozzle must be 4 Nm.
6. After having replaced the nozzle, put the burner
back in its seat.
7. Tighten the burner fastening screws.
8. Put the shelf back in its seat.
Replacing the broiler burner nozzle
CAUTION
Take care not to damage the ther-
mocouple or the igniter when doing the following
operations.
1. Open the door and remove all the accessories
from inside the oven.
15