Table of Contents
Advertisement
Optional Front Grill Installation - Part #656-991 (Black)
This optional grill meets the requirement of the 120 square inches required for the enclosure in all installations and is designed to keep the enclosure cool.
In this application, both the flange and screws to secure the grills are exposed as this grill is designed to be installed after the finished facing has been placed
on the wall.
To install the front grill - frame an opening of 4-3/8'' H x 39-1/8'' W (111mmm H x 994mm W).
The finished facing material should be attached and be the same size as the framed opening to eliminate gaps.
Install the grill and secure in place with one screw on either side, installed from the front.
C
Optional Side Grill Installation - Part # 656-992 (Set of 2/Black)
These optional grills meet the requirement of the 120 square inches required for the enclosure in all installations and are designed to keep the enclosure cool.
In this application, both the flange and screws to secure the grills are exposed as this grill is designed to be installed after the finished facing has been placed
on the wall.
To install the side grills - frame an opening of 8-5/16'' H x 8-5/16'' W (211mm H x 211mm W).
The finished facing material should be attached and be the same size as the framed opening to eliminate gaps.
Install the grill and secure in place with one screw on either side, installed from the front through the louvers.
Repeat steps to install the second grill to the other side of the chase.
A
B
C
B
Secure with screws from the front through the sides.
A
B
C
Secure with screws through louvers to the sides.
DIMENSIONS
A
39-1/8'' (994mm)
B
4-3/8'' (111mm)
C
Maximum 3'' (76mm) from top of enclo-
sure.
DIMENSIONS
A
Maximum 3'' (76mm) from top of enclo-
sure.
B
8-5/16'' (211mm)
C
8-5/16'' (211mm)
Unit may not be exactly as shown,
but the drawing dipicts the process.
installation
CV40E-11 City Series |
31
Advertisement
Table of Contents
