Power Supply Assembly - Lenovo ThinkCentre neo 50t Gen 4 User Manual

Removal steps
Note: If the card is held in place by retaining latch, press the latch as shown to disengage the latch, Then,
gently remove the card from the slot.

Power supply assembly

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Although there are no moving parts in the computer after the power cord has been disconnected, the
following warnings are required for your safety.
Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury, seek
medical care immediately. Never remove the cover on a power supply or any part that has the following label
attached.
40
ThinkCentre neo 50t Gen 4 User Guide