Technics SA-EX510 Operating Instructions Manual page 16

Operation on
LQUARTZLOCK STEREO
i We
ae
|
|
'QUARTZLOCK STEREO
O
rit? ¢
ie i
anne t
Preset channel
|
The desired broadcast stations can be preset into the desired
channels by the user.
Set to the desired broadcast.
(See page 14.)
If interference or static is keeping you from enjoying an FM
broadcast, press FM AUTO/MONO and change to monaural.
You can preset the memory in monaural just as in stereo.
Press MEMORY.
To cancel the memory function, press MEMORY again.
Press PRESET (V) or (A) to select the desired
channel.
Holding the buttons down lets you scroll through channels
faster.
Press MEMORY.
The channel will blink on the display.
To continue presetting
Repeat steps 1 through 4.
To listen to preset broadcast stations E
Press PRESET (V) or {A} to select the desired
channel.
Holding the buttons down lets you scroll through channels
faster.
To confirm the channe! number of the broadcast station
being received
Press TUNER.
(The channel number will be displayed for approximately 1 second.)
The channel number is not displayed if you change the reception
frequency or FM mode setting.
For your reference
Even if the power is switched to standby or the power cord is
disconnected from the household AC outlet, the memory will retain
its contents for approximately one month.
If frequency presettings are accidentally erased
Make the presettings once again.
The power cord should remain connected for one hour or more for
the memory back-up to be effective.