Basic Operations Oc; Cccscsesssesseescesessesssessecseessanesvecsueseneseeens - Technics SA-EX510 Operating Instructions Manual

t
| Basic operations |
Before operation, set VOLUME to the "MIN" position.
Press POWER.
Press A and/or B to select the speaker system(s)
to be used.
A and B refer to the speaker terminals at the rear of the unit.
Press SPEAKERS and check the "SPEAKERS"
indication lights up.
If the button is pressed once more, the indicator will switch
off and no sound will be heard from the speakers.
Caution
Before selecting your speaker system, make sure impedance
is correct in the speakers you want to use. (See page 10.)
PORHAAERES HREM HOHE EEE HE EOE
SA-EX510/EX410 Press to select the desired source, and start the
— — = — l desired source.
(Refer to the appropriate operating instructions for details.)
VCR: To watch video tapes (VCR)
TV/DVD: To watch TV or DVD
TAPE MONITOR |: To listen to cassette tapes (The tape
monitor indicator will appear.)
(See below.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
To watch a video (or DVD) or the TV, set the TV to either the
TV mode or VIDEO mode as indicated below.
è To enjoy videos (or DVD)
Set it to VIDEO mode.
e To watch TV `
Set it to TV mode.
(EESTE ETTETTTETTEZTTTT]
After listening is finished
Be sure to reduce the volume level, and switch the power to the
MIN MAX
standby condition by pressing POWER.
When the tape monitor indicator is lit or flashing FJ
This indicates that the tape monitor function of this unit is ON.
To listen to sources other than a tape, be sure to press
TT a
[TAPE MONITOR] > TAPE MONITOR | and check the indicator goes out.
Lit or flashing