Table of Contents
Advertisement
4-2-2.
Frequency Selection
Frequency can be changed in the VFO mode. The selected
frequencies of the main band can be stored in the Memory
channels, and the Call channel (TM-621A/721A).
(See Memory Entry page 23, CALL CHANNEL page 25.)
You can select the VFO mode, MEMORY
Recall mode, and
CALL Channel mode using the following keys.
VFO mode
MR/M key
CALL key
uf VO kev! VEO key.
CALL key
|
mode |=
| CALL channel mode
MEMORY Channel NOs
MRI/M key
__(TM-621A/721A)
It is impossible to change the mode
directly in the SUB
band.
It is possible to transfer the mode
of the MAIN
band
to/from SUB band.
Exchange the Band
Press the BAND
key. Eachtime the BAND
key is pressed,
the contents
of the SUB band are exchanged
with the
MAIN band.
@ MAIN BAND
@ VFO mode
+ H
1. Press the VFO key to select the VFO
mode.
2. Rotate the MAIN Tuning control, MHz
keys,
or Microphone
UP/DWN
swit
ches to select the desired frequency.
16
3. To return to the VFO mode press the
[KENWOOD
® Memory Recall mode
. Press the MR/M
key. The previously
selected
memory
channel
will
be
displayed on the LCD display.
2. Rotate
the
MAIN
Tuning
control
or
Microphone
UP/DWN_
switches
to
select the desired Memory Channel.
mn
VFO key.
@ CALL Channel mode (TM-621A/721A)
1. Press the CALL key to select the CALL
Channel mode. The CALL indicator and
the call channel
frequency
are dis-
played on the LCD display.
2. To return to the previous mode press
the CALL key again.
Note: -
—
—
The Memory Channel number will not disappear during
the CALL channel mode, if the call channel is selected
from the MR mode.
@
SUB BAND
@ If the
current
frequency
is in VFO
mode; Rotate the SUB Tuning control
sii
to select the desired frequency.
@ |f the current frequency is in MR mode;
Rotate the SUB Tuning control to select
©
the desired
Memory
Channel.
(The
Channel number is not displayed.)
Advertisement
Table of Contents
