Roland CompuRhythm CR-8000 Owner's Manual page 12

Applications
1. Substitute for a Metronome
Bass Drum 4" in Basic Rhythm Bank I
can be used for a Metronome.
2.094 Rhythm
You can produce an odd rhythm by
using Pedal switch DP-2 which is con-
nected with RE-START jack on the rear
panel.
3. Delicate difference of rhythm variations
by Register
Set two rhythms of the same type into
Register.
First, select ROCK-5, HH-16" and
OPEN HH. Then press the Register
button. Select ROCK-3. Press the "Start/
Stop" button to start rhythm. Change
over these rhythms at will by pressing
the Register button. So you will find a
delicate nuance of rhythm variation.
4. Register's special effect
By connecting Trigger out of CR-8000
to Register jack on the rear panel, you
can produce a different rhythm pattern.
For example,
1. Set the Trigger out to 16".
2. Stop the rhythm if it is running.
3. Select "RHUMBA" of Basic Rhythm
Bank.
4. Press the Register button.
5. Select "ROCK-3".
6. Start the rhythm by pushing Start/
Stop button.
TRIGGER-OUTPUT REGISTER
SU ACC од
am ©
5-2 Z
Trigger Out combining any rhythm pat-
tern.
5. To use Crash sound at the ending
Keep the Crash Switch on. Get Fill-in
rhythm in pre-bar of last one. And stop
rhythm soon after the Crash sound is
given at the last bar so that you can get
a feeling of natural ending.
с
ex: Writing the rhythm pattern
е TANGO" 32 steps per measure
HH 0000
SpeooooooQ
В0ФООООСО #00000 #800005 8000009
Others
E About Tempo Display
*|f you are programming the 4-beat
rhythm with 12 or 16 step per measure,
Tempo Display will display a precise
tempo.
elf you are programming the adjacent
two rhythm patterns as one measure,
Tempo Display will display a double
value of actual tempo.
elf you are programming the 3-beat
rhythm with 12 (or 24) steps, actual
tempo is 3/4 (or 3/8) values of
displayed tempo.
10