Table of Contents
Advertisement
Bluetooth
█
®
Pairing cannot be done.
• Check the Bluetooth
• The device is out of the 10 m (33 ft) communication range. Move the device nearer to the system.
The device cannot be connected.
• The pairing of the device was unsuccessful. Do pairing again.
• The pairing of the device has been replaced. Do pairing again.
• This system might be connected to a different device. Disconnect the other device and try connecting the
device again.
• The system may have a problem. Turn off the system and then turn on again.
• If "MODE 2" is selected in "LINK MODE", select "MODE 1" (
The device is connected but audio cannot be heard through the system.
• For some built-in Bluetooth
operating instructions of the device for details.
Sound from the device is interrupted.
• The device is out of the 10 m (33 ft) communication range. Move the device nearer to the system.
• Remove any obstacle between the system and the device.
• Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are
interfering. Move the device nearer to the system and distance it from the other devices.
• Select "MODE 1" for stable communication (
Playback image and sound are not synchronized.
• Restart the playback app of the device.
Main unit displays
█
"--:--"
• You connected the AC power supply cord for the first time or there was a power failure recently. Set the clock.
• Track play time is more than 99 minutes.
"ADJUST CLOCK"
• The clock is not set. Adjust the clock.
"ADJUST TIMER"
• The play timer is not set. Adjust the play timer.
"AUTO OFF"
• The system has not been used for 20 minutes and will turn off within a minute. To cancel, press any button.
"ERROR"
• An incorrect operation was done. Read the instructions and try again.
"F61"
"F77"
• Disconnect the AC power supply cord and consult your dealer.
"F70"
• Examine the Bluetooth
• Disconnect the Bluetooth
"F76"
• There is a problem with the power supply.
• Disconnect the AC power supply cord and consult your dealer.
"NODEVICE"
• The USB device is not connected. Examine the connection.
"NO DISC"
• You have not put in a disc.
22
device condition.
®
devices, you have to set the audio output to "SC-PM270" manually. Read the
®
connection.
®
device. Turn off the system and then turn on again.
®
15).
15).
Advertisement
Table of Contents
