Table of Contents
Advertisement
Sleep timer
The sleep timer turns off the system after the set time.
1
Press [SETUP] repeatedly to select "SLEEP".
2
Press [R, T] to select the setting (in minutes) and then press [OK].
To cancel, select "OFF".
Note:
• The remaining time is always shown on the display. The display changes temporarily when you perform other
operations.
• The sleep timer always comes first. Be sure not to set an overlap of timers.
Others
Auto off
This system automatically turns off when you do not use it for approximately 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
This function does not work when you are in radio source or when a Bluetooth
Bluetooth
®
This function automatically turns on the system when you establish a Bluetooth
paired device.
1
Press [SETUP] repeatedly to select "BLUETOOTH STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
Some devices may take longer to respond. If you are connected to a Bluetooth
system, wait for a minimum of 5 seconds before connecting to this system from your Bluetooth
Software updates
Occasionally, Panasonic may release updated software for this system that may add or improve the way
a feature operates. These updates are available free of charge.
For more details, refer to the following website.
https://panasonic.jp/support/global/cs/
(This site is in English only.)
Checking the software version
█
1
Press [SETUP] repeatedly to select "SW VER." and then press [OK].
The software version is shown.
2
20
Press [OK] again to exit.
SLEEP 30
standby
SLEEP 60
SLEEP 90
OFF
SLEEP 120
device is connected.
®
connection from a
®
device before turning off the
®
device again.
®
Advertisement
Table of Contents
